A chainsaw is an excellent tool for cutting trees and woods. It has become very popular and it is better than an axe. Because, it has made trees cutting, pruning, and other cutting jobs very easy and comfortable. But before using you need to know the guidelines of Sharpen A Chainsaw.
However, this saw needs maintenance. Without a sharp saw, you cannot make a good cut through any material. Besides, a dull saw is very harmful to use. Hence, you need to be concerned about the sharpness of the saw.
To get a better sharpness, you need to Sharpen your saw according to some necessary steps. Such as:
Tools For Sharpen A Chainsaw
For better sharpening, you need the right tools. There are some particular tools to sharpen the chainsaw. Such as:
- A round file that fits on the diameter of the cutter. Normally, you will find 5/32’’, 3/16’’ and 7/32’’ sizes diameters in the market.
- A file guide to keeping the file in a steady depth to sharpen each blade.
- A flat file, a gauge and a depth gauge guide for sharpening the blades.
However, do not use a rattail file to Sharpen Chainsaw. Because these rattail files will damage your cutter. Therefore, choose the perfect tool for perfect sharpening.
Best Way To Sharpen A Chainsaw
After choosing the tools, it is time for the main course. To Sharpen A Chainsaw, you need to follow some important steps. Such as:
- Remove the cap of the spark plug. Otherwise, there will be a possibility for the saw to get started and that is not good for you.
- Clean and check the chain properly. If the chain is overly worn or damaged then change it.
- Chose the perfect file for sharpening and place about 20% of the file above the blade.
- File the cutter according to the angle of the top of it. Besides, stroke for about 2-3 times until the cutter becomes shiny silver.
- Place the gauge over the chain and file each the same amount so that each cutter can get the same length flat edge on the top. It will boost up the performance of the saw.
- Use the file guide to keep the file steady. Besides, the guide will make the rasping easier.
- You should sharpen the edge of the blades on both sides. Because the edges of the blades face both ways.
- File the rakes with a flat-file and make sure that the tips of the rakes are lower than the cutting blades.
- After Sharpen A Chainsaw, put back the cap of the spark plug.
Caution
During the sharpening, be careful about some important things. Like:
- Do not Sharpen A Chainsaw without any gloves.
- Be careful about the cutter angle.
- You have to use every tool appropriately.
- Never file a chain when it is hot.
- During sharpening, never turn on the chain type saw.
By maintaining these cautions, you can Sharpen A Chainsaw without any complexities. People often comes with a question if it is worth sharpening a chainsaw? And the answer is yes. It will cost less than $5 to buy a correct file to sharpen any given chain and it can be used literally hundreds of times. But, saw sharpening is a skill you should learn.
Conclusion
A chainsaw has become a great alternative to axe. In addition, it provides you better flexibility than traditional axe. However, it requires adequate maintenance.
Since a dull chainsaw is worthless, Sharpen A Chainsaw with appropriate directions but do not forget about the cautions. Otherwise, you know what will happen.